RE: [Classicrendezvous] Audax & Generator Bosses

(Example: Production Builders)

From: "Chuck Taylor" <Chuck_Taylor@gmo.com>
To: ClassicRendezvous@bikelist.org
Subject: RE: [Classicrendezvous] Audax & Generator Bosses
Date: Tue, 7 Nov 2000 08:18:30 -0500

Hi Dave, and All,

My hetchins hellenic frame/fork is set up as a touring rig and has some sort of a lighting bracket on the fork blade - kind of a slotted arrangement, about 3.5" long along the length of the blade, protruding forward. Like Dave M's bike, mine has routing through the top tube for lighting wires, and custom rear rack with "dainty" loops to accommodate what I suspect to be wiring for the rack mounted tail light. There's also flat square seatstay brazeon, about the size of your fingernail, that protrudes rearward. It has a threaded hole and I suspect has something to do with the lighting.

Can anybody tell me how the lighting is configured on this bike? Can anybody recommend a source for appropriate lighting equipment? Regards, and thanks.

-Chuck Taylor Boston, MA
> -----Original Message-----
> From: DMart84815@aol.com [SMTP:DMart84815@aol.com]
> Sent: Tuesday, November 07, 2000 12:09 AM
> To: Lsquaredb@aol.com
> Cc: ClassicRendezvous@bikelist.org
> Subject: Re: [Classicrendezvous] Audax & Generator Bosses
>
> Hello Leonard.
>
> I have a 1968 Hetchins Magnum
>
> Bonum that was spec'd for evening use. It has a fitting on the fork blade
> for
> a lamp bracket, internal wiring entry and exit points under the toptube
> and a
> dainty little loop brazed to the seat stay (inside of the s.s. cap) to
> keep
> the wire out of harms way. The bike is a virtually unaltered Cupertino
> Bike
> Shop Touring Set-up Hetchins.