Re: [CR]CP/Canti Braze-on Info Wtd.

(Example: Racing:Beryl Burton)

From: "Diane Feldman" <feldmanbike@home.com>
To: "Chris Beyer" <beyerc@mailserver.volvo.com>, "classicrendezvous" <classicrendezvous@bikelist.org>
References: <3B1F9EE5.C1F8B16C@mail.volvo.com>
Subject: Re: [CR]CP/Canti Braze-on Info Wtd.
Date: Thu, 7 Jun 2001 09:04:40 -0700


Chris, What's the frame and do you know what kind of brakes it was made for? The flats make it sound like Dia-Comp merchandise. David Feldman


----- Original Message -----
From: Chris Beyer
To: classicrendezvous
Sent: Thursday, June 07, 2001 8:33 AM
Subject: [CR]CP/Canti Braze-on Info Wtd.



> Howdy, Y'all:
>
> I recently acquired a frameset which has braze-ons for centerpull
> brakes. The stub over which the brake arm slides has a flat on the
> inside, apparently to locate the flat piece which is drilled for the
> return spring (looks like a flat washer with a d-shaped hole in the
> center).
>
> My problem is that the return spring mounts are missing off the front
> brazeons. Can anyone suggest a suitable piece for this, or can I obtain
> braze-ons someplace and remove the return-spring plate?
>
> Hope this makes sense..........
>
> Chris Beyer
> Sunny Bloomfield, NJ