Re: [CR]Teledyne Titan replacement fork


Example: Humor
From: <SM2501@aol.com>
Date: Wed, 22 Aug 2001 08:30:29 EDT
Subject: Re: [CR]Teledyne Titan replacement fork
To: OROBOYZ@aol.com, classicrendezvous@bikelist.org


In a message dated 8/21/01 10:17:52 PM Central Daylight Time, OROBOYZ writes:


> I can go measure my Teledyne fork but a "27 inch" job is not necessarily
> what you are looking for. The dimension that you are referring to is the
> center of the dropouts/front axle to the center of the brake hole.. If
> memory serves, it should be about 357 mm I think.. ( Richie? Mark?
> Simianboy?)
>
>

I just measured the fork. From center of the brake hole to the center of the dropout, the measurement is 365mm. to the top of the dropout, the mesurement is 361mm. I dry fitted a 700c fork in the frame, and it dropped the front end 1/2".

Scott McCaskey
Bicycles,Inc
510-I Harwood Rd.
Bedford, TX 76021
817-268-6572
scott@bicyclesinc.com
http://www.bicyclesinc.com