RE: [CR]Help ! Titanium-cage TA pedal conundrum

(Example: Framebuilders)

From: "David Bilenkey" <dbilenkey@sympatico.ca>
To: "Mario Girasa" <oldbike8538@juno.com>
Cc: "Classicrendezvous" <classicrendezvous@bikelist.org>
Subject: RE: [CR]Help ! Titanium-cage TA pedal conundrum
Date: Wed, 24 Apr 2002 13:10:18 -0400
In-Reply-To: <20020424.123027.-337555.0.oldbike8538@juno.com>


Mario,

Perhaps these figures would help:

density of titanium: 281 pounds/cubic foot

density of aluminium: 170 pounds/cubic foot

Calculate the volume of the part (perhaps by submersion in a volume of water) and then weigh the part, and see which density comes closest.

Good luck,

David Bilenkey Ottawa, Ontario, Canada


> -----Original Message-----
> From: classicrendezvous-admin@bikelist.org
> [mailto:classicrendezvous-admin@bikelist.org]On Behalf Of Mario Girasa
> Sent: April 24, 2002 12:30 PM
> To: classicrendezvous@bikelist.org
> Subject: [CR]Help ! Titanium-cage TA pedal conundrum
>
>
> howdy folks,
> need you expertise. For reasons I won't get into, I believed the cages on
> my TA pedals (on ebay) are of Titanium. I am starting to think they are
> NOT, and I wish to revise my description as such, or cancel the auction
> altogether and start over. I'm thinking of scratching a hidden portion of
> the cage, to reveal silver alloy (or not). I understand the anodizing is
> very thick and this might take quite a scratch. Also, I understand Ti can
> be anodized, but that the Ti will be notably darker than the silver of
> alloy. The box says nothing on it regarding cage composition. I have been
> informed that Ti cages are not mentioned in any TA catalog. I'm wondering
> if anyone has ever encountered Titanium cages for their TA pedals, or if
> anyone knows a non-destructive means of testing for Titanium (another
> list member informed me that grinding titanium will cause white sparks,
> whereas alloy will cause few if any sparks). These cages are insanely
> light. Would Titanium be heavier than aluminum in the same shape and size
> ? (aka, which has higher density ?) Thanks for your patience and help !
> mario girasa Cambridge, MA