Re: [CR]Re: Stainless steel DB frame

(Example: Framebuilders:Alberto Masi)

Date: Wed, 28 Aug 2002 23:14:05 -0400
From: "Joe Bender-Zanoni" <joebz@optonline.net>
Subject: Re: [CR]Re: Stainless steel DB frame
To: classicrendezvous@bikelist.org
References: <1a7.7838ef5.2a9e5530@aol.com> <3D6D6550.8033EE6D@earthlink.net>


http://www.classicrendezvous.com/Events/Cirq_show01_3.htm

Here is my Jim Redcay with a protype set of Henry James stainless lugs built years before they came out. Over 50K miles on this guy before the refurb.

Joe Bender-Zanoni
Great Notch NJ


----- Original Message -----
From: Chuck Schmidt
To: classicrendezvous@bikelist.org
Sent: Wednesday, August 28, 2002 8:06 PM
Subject: Re: [CR]Re: Stainless steel DB frame



> Dale Brown wrote:
> >
> > FWIW, I found pics of my stainless steel lugged frame with the Italian-made
> > stainless lugs& put them up on the CDO web site ... Compared to Dave's
> > Bohemian marvel, it is a snore though!
> > It is the next to last entry at the bottom of the page:
> >
> > http://www.cyclesdeoro.com/Dales_frames/dbrown.htm
>
>
> Here's a Waterford fixed gear road bike I took possession of a few
> months ago. Reynolds 853 with polished stainless steel lugs (Henry
> James) and fork ends. The lugs are actually shinier than they look in
> the jpegs!
>
> http://www.velo-retro.com/Waterford.jpg
> http://www.velo-retro.com/Waterf.1.JPG
>
> Again, pretty modest compared to a Bohemian marvel...
>
> Chuck "48x16" Schmidt

> SoPas, SoCal

>

> .