Re: [CR]Campagnolo Corsa geared bike drop-outs

(Example: Framebuilding:Tubing:Falck)

From: <NortonMarg@aol.com>
Subject: Re: [CR]Campagnolo Corsa geared bike drop-outs
To: TheMaaslands@comcast.net, classicrendezvous@bikelist.org
Date: Sat, 14 Dec 2002 02:11:02 EST

In a message dated 12/13/02 6:22:14 PM Pacific Standard Time, TheMaaslands@comcast.net writes:

<< Carsten Rehbein is offering a set of 17 tooth Campagnolo Corsa drop-outs. For all of the taller riders who have wanted to ride a corsa-equipped bike this may be your best opportunity (Dirk comes to mind) to be able to do so. A good frame builder should be able to substitute these drop-outs into an existing frame for you. Contrary to what Carsten says in his description, these are not appropriate for the Paris-Roubaix gear. The PR would normally use 19 tooth drop-outs to allow the use of a 5 cog block.

http://ebay.com/<blah> These are two LEFT drop outs, one of which has been filed to fit a skinny chainstay. Certainly one of them can be bent to be used on the opposite side, but the lettering will be wrong. Or is there no lettering on these?
Stevan Thomas
Alameda, CA