Re: [CR]Re:Horizontal vs Vertical Dropouts

(Example: Framebuilders:Tony Beek)

From: "Michael Mullett" <mike@mullett.freeserve.co.uk>
To: <MasiGC3V@aol.com>
Cc: <classicrendezvous@bikelist.org>
References: <d2.1e58c8ff.2abfafbb@aol.com>
Subject: Re: [CR]Re:Horizontal vs Vertical Dropouts
Date: Mon, 23 Sep 2002 23:16:19 +0100

Sorry about that. >not a patch< is a figure of speech which means >does not compare with<. I remove all the sharp corners and round the bottom of the fork end to be completely smooth so that there is nothing for the QR to catch on. The rather basic drawing attached should explain.

Hope that explains.

Mike Mullett
Reading
UK