[CR] Seeking 12 or 13 vintage stem; Raleigh Pro report; Campy bar-ends question

(Example: Production Builders:Cinelli)

From: <PBridge130@aol.com>
Date: Tue, 15 Apr 2003 00:53:29 EDT
To: classicrendezvous@bikelist.org
Subject: [CR] Seeking 12 or 13 vintage stem; Raleigh Pro report; Campy bar-ends question

Finally built the mid-70's Raleigh Pro I acquired a month or two ago. All correct NR except I apparently no longer own any five-speed freewheels, so there's a six in there. NR bar-end shifters. Yes, Stevan, they work pretty darn well, feel pretty darn good. Oops.... set the bar-ends up with modern teflon housing. Is it true that the stainless steel spring housing is no longer to be had?

That bike rides nicely. Substantial. Very stable, a bit more than I prefer, but still a nice feel. On the stiff side -- solider than an SL ride. I'm ging to have to hunt down a five-speed freewheel so I can take a spin on the Mavic MdO tubie wheels I got at the swap. Looking forward to feeling the bike the way it was meant to be felt.

Curious -- are all vintage Campy bar-ends non-symmetrical? Right identical to left, screw goes through both from the same side, lock nuts thread on both from the same side? I'd never set up Campy bar-ends before. I got a huge kick out of the fact that a T wrench socket fits snugly into the recess where the 8mm locknut lives.

Oh yeah. Seeking 12-13 vintage stem. Prefer 3ttt Record, but I've got bars for either ttt or Cinelli.

Cheers,

Peter Bridge
The Mile High City, CO