[CR]Re: TA criterium BCD

(Example: Framebuilders:Brian Baylis)

From: <REClassicBikes@aol.com>
Date: Tue, 24 Jun 2003 15:11:58 EDT
To: classicrendezvous@bikelist.org
Subject: [CR]Re: TA criterium BCD

A TA Criterium ring set up has a BCD of 152, six holes, for the inner ring. I think the minimum is a 46? The same bolt circle is used for the cyclo cross rings. TA also used to make a double adapter, a five arm spider which bolted to the 5 holes in the crank. I think this was a 144 BCD, but I would need to check. If any one needs any of these drop me a line.

Regards
Martin Coopland