[CR]Freewheel clearance problem

(Example: Bike Shops:R.E.W. Reynolds)

From: <Atrikerider@aol.com>
Date: Fri, 15 Aug 2003 16:18:07 EDT
To: classicrendezvous@bikelist.org
Subject: [CR]Freewheel clearance problem

I just tried to put a 120 mm rear wheel with a 5 speed freewheel into an early 50's frame that measures 118 mm (?). The teeth on the 14t cog hit the chainstay and therefore it doesn't turn. I can't move the wheel further back because it is already against the gear hanger for the derailleur. Should I start looking for a 4 speed freewheel? The frame did originally have a derailleur because the brazed on fittings are there for the shift lever and the cable guides.

Paul Patzkowsky Longmont, Colorado