Re: [CR]Roval Wheels ???

(Example: Framebuilding:Technology)

From: "Charles T. Young" <youngc@netreach.net>
To: "Eric Elman" <tr4play@cox.net>, <classicrendezvous@bikelist.org>
References: <sf94f990.054@co.ba.md.us> <000b01c39828$f65d4f90$13dd0944@elman1>
Subject: Re: [CR]Roval Wheels ???
Date: Tue, 21 Oct 2003 20:50:04 -0400


There were at least two combinations of Roval wheelsets. I have one pair with 24/18 and another pair with 18/16. I wonder which, if any of these, I should be riding at around 180 lbs.

They do feel nice but there must be some slop in the 16 spoked front wheel at the hub. It is true and tight but induces a nasty low speed shimmy - manageable but unpleasant on my Holdsworth Professional and purely outrageous when fitted to my DeRosa SLX Professional. Need to fuss with it and would welcome any Roval tips and tricks.

Charlie Young
Honeybrook, PA


----- Original Message -----
From: Eric Elman
To: classicrendezvous@bikelist.org
Sent: Tuesday, October 21, 2003 7:13 PM
Subject: [CR]Roval Wheels ???



> A short time ago I posted a question which led to the conclusion that Roval
> wheels were on topic. Next question is in regards to number of spokes. I
> was recently told that Roval wheelsets were available with three different
> spoke counts to accomodate riders of different weights. Can anyone on the
> list confirm this, and if so, can you advise what the options were for both
> front and rear wheels? Finally what OLN sizes did they come in?
>
> Thanks in advance,
>
> Eric Elman
> in stormy Somers, CT