[CR]question for wheelbuilders......

(Example: Racing:Beryl Burton)

Date: Thu, 15 Jan 04 22:00:03 +1300
From: "Wayne Davidson" <wayne.collect@xtra.co.nz>
To: "CR BIKE LIST" <classicrendezvous@bikelist.org>
Subject: [CR]question for wheelbuilders......

Hi all, esp wheelbuilders, if anyone has done the following can they please contact me or the list. Looking forward to any comments on this......regards wayne davidson Invers NZ.......

Get a Campagnolo record small flange road hub 126mm spacing, remove the axle and turn around so that the hub now has the offset biased to the drive side, install a pista/track cog and fine tune the offset to allow proper driveline alignment when fitted to a road frame, if you have done this and ridden this wheel, was the final result acceptable, as to having a strong wheel without the horrible flat driveside, or do you feel that the wheel would have been better with a little bit more width across the flanges?