Re: [CR]Pump behind seat tube

(Example: Framebuilding:Restoration)

From: "jerrymoos" <jerrymoos@sbcglobal.net>
To: <Philcycles@aol.com>, <classicrendezvous@bikelist.org>
References: <37.4488c9fb.2d6c0364@aol.com>
Subject: Re: [CR]Pump behind seat tube
Date: Mon, 23 Feb 2004 20:07:12 -0600


Works fine with a Zefal HP on my new Bates also.

Regards,

Jerry Moos
Houston, TX


----- Original Message -----
From: Philcycles@aol.com
To: classicrendezvous@bikelist.org
Sent: Monday, February 23, 2004 7:31 PM
Subject: Re: [CR]Pump behind seat tube



>
> In a message dated 2/23/04 5:04:25 PM, raleypc@netscape.net writes:
>
> >My Hetchins mounts the pump in this fashion. You need one of the old alloy
> >pumps (France of English) with a tapered end that sort of locks itself
> >between the chainstays.
> >
> >
> Na. You can do this with almost any pump as long as you have enough clearence
> between tire and seat tube. Just put the head on the CS. I've done this a
> couple of times with Campy heads. works fine.
> Phil Brown
> Weird fog todayin San Rafael, Calif.