Harris,
The hole does face the headtube, but it's on the underside of the top tube, part of the seat lug cluster.
Steve Bowen Palos Verdes California (mid 90's today!)
-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Harris Sent: Sunday, March 28, 2004 7:02 PM To: Philcycles@aol.com; classicrendezvous@bikelist.org Subject: Re: [CR]FW: Identifying frame
Do you mean the hole on seatlug would face headtube?Or just that it is located in that corner of seatlug?Harris Spracher,Waynesboro Va.
Philcycles@aol.com wrote:
In a message dated 3/28/04 6:13:42 PM, steveb@pvbike.com writes:
>The only other distinguishing characteristic is an unusual seat post
>binder arrangement: There is a hole cut through the bottom of the seat
>tube lug, facing the front of the bike, and it looks like some sort of
>expander bolt was meant to go through there and press up against the
>seat post. The seat tube has no split at the top like a normal frame.
>
>Any possibility of you identifying this one way or the other?
>
>
Without looking at a picture it's tough but the seat post binder you
describe
is Legano.
Phil Brown
SR, CA
_______________________________________________
---------------------------------
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.