Re: [CR]Chrome plating and Sand Blasting

(Example: Production Builders:Tonard)

Date: Tue, 24 Aug 2004 10:39:13 +0200
From: "renaissance-cycles" <info@renaissance-cycles.com>
Subject: Re: [CR]Chrome plating and Sand Blasting
To: Bikerdaver@aol.com, gillies@cs.ubc.ca, classicrendezvous@bikelist.org
References: <42.566f4314.2e5bedae@aol.com>


File with rounded upward motion, this pervents the creation of flat spots. I've done this many and many times. Be gental so you don't remove more metal than you would like. Also rotate the fork as you proceed to file away. I just completed a fork a few days ago.

BC
Baron C......................And the gang!!
Renaissance cycles,
Eindhoven Holland.


----- Original Message -----
From: Bikerdaver@aol.com
To: gillies@cs.ubc.ca
Sent: Tuesday, August 24, 2004 3:02 AM
Subject: [CR]Chrome plating and Sand Blasting



> Hello-
> I know that this topic may have been cover before, but presently I have a
> slightly different approach to the question. What if you have nicely intact
> chrome plating on your fork stearer tube, but want it "removed" so that a thread
> cutting tool won't have to become useless in the process of cutting new threads?
> Basically, I know that a thread-cutting tool would work, but I don't want to
> destroy it. What is the easiest way to remove the chrom or at least weaken it
> so that I can cut new threads? Any suggestions would be most appreciated.
> cheers-
> Dave Anderson
> Cut Bank MT