Put a good point on your punch first. Steve
The Bike Stand 1778 East Second Street Scotch Plains NJ 07076 908-322-3330 http://www.thebikestand.com
-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Chuck Schmidt Sent: Friday, January 07, 2005 8:20 PM To: classicrendezvous@bikelist.org Subject: Re: [CR]drilling brake levers
Jon Williams wrote:
>
> I have a pair of tatty NR levers that are going to have to be sanded
out and
> polished anyway, so I thought I would do a "period" drill job on them.
Been
> looking at some old photos and really like the look of the holes
wrapping up
> the side and around the cable pivot. I do not have a mill so I want to
keep
> the job to what can be done with a drill press or free-hand. Any tips
or
> tricks would be appreciated. Thanks in advance.
Here ya' go :-)
http://www.velo-retro.com/
Chuck Schmidt South Pasadena, Southern California
.