RE:[CR]Huret Jubilee Questions

(Example: Framebuilders:Masi)

From: "Steve Birmingham" <sbirmingham@mindspring.com>
To: <classicrendezvous@bikelist.org>
Subject: RE:[CR]Huret Jubilee Questions
Date: Tue, 22 Mar 2005 13:01:48 -0500
In-Reply-To: <MONKEYFOOD0OUIHNkjg0000426d@monkeyfood.nt.phred.org>


I just checked my boxes of stuff, and it looks like some Allvits had the same pulley. If the inner races aren't identical, the outer plastic seems to be the same. If you don't have an allvit with the right pulley, I have an extra one.

Steve Birmingham Lowell,Ma USA

Subject: [CR]Huret Jubilee Questions Precedence: list Message: 17

I'm in the process of cleaning up a 1975 Raleigh Competition. This bike has been ridden very little but, unfortunately, I've run into problems with the Jubilee derailleurs. The rear has a piece of plastic broken off the upper toothed pulley wheel. What other Huret derailleurs, besides Jubilee, would use this pulley? I'd like to repair this derailleur, as it is in almost NOS condition. But I do not want to spend big money on a Jubilee derailleur just to get a pulley. I was hoping that Huret's lesser models might use this same pulley. Any options?

Also, the front derailleur has a broken mounting band. The casting was fractured when I took it off the seat tube. Unfortunately, it is the side that includes the derailleur body so I'm pretty sure I'm screwed on that

one. I'll probably have to buy a replacement. If anyone has some Jubilee

spare parts of which they would like to rid themselves, please contact me off-list.

George Allen
Lexington, Ky
USA