Re: [CR]steel campagnolo crankset question.

http://www.classicrendezvous.com/Italy/Olympia/Fred_Yavorsky.htm

Like these? Bottom of the page...

Fred ********************************** Fred Yavorsky Jenkintown, PA fred@twistcomm.com http://twistcomm.com/FredBikes.html

> From: Duane Kennard <d.kennard@adelphia.net>
> Date: Mon, 29 Aug 2005 10:35:54 -0700
> To: marc garcia <marcgarcia80@ameritech.net>
> Cc: "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>
> Subject: Re: [CR]steel campagnolo crankset question.
>
>
> They were called "Sport" cranks, and from early '70s.
> The rivets are factory.
>
> Cheers,
>
> Duane Kennard
> Los Angeles, USA
>
>
> On Aug 29, 2005, at 10:21 AM, marc garcia wrote:
>
>> I just recieved some campy steel gran sport cotterless
>> cranks today and I have a question about the chain
>> rings. The inner ring is riveted to the larger and
>> before I bust out the hack saw I wanted to know if
>> this was done at the factory or by someone in their
>> garage. Also, when were these cranks produced, there
>> aren't any markings on these.
>>
>> thanks
>> marc garcia
>> chicago IL