[CR]Wanted: Information about a Line Seeker cycle

(Example: Framebuilders:Jack Taylor)

Date: Mon, 24 Oct 2005 21:45:02 -0700 (PDT)
From: "Peter Naiman" <hetchinspete1@yahoo.com>
To: classicrendezvous <classicrendezvous@bikelist.org>
Subject: [CR]Wanted: Information about a Line Seeker cycle

I'm trying to help someone out who is not a CR member, and contacted me wanting information about a lightweight bicycle frame made in the early 70s called a Line Seeker. Apparently it was made by the same fellow responsible for the Exxon Graftek. The frame apears to be made from the same tubing and stainless steel lugs as the Graftek, but the bottom bracket appears to be generic in make. The odd thing about the frame according to the owner is that the frame was glued together or bonded with epoxy, then had pins inserted through the lugs and tubing to hold them frame together, or strengthen it. I've not seen the frame, but might try to get a few jpgs.

Peter Naiman
Glendale, WI