[CR]Source for 1/2" pitch cogs to fit DA 10 track hubs

(Example: Production Builders:Cinelli:Laser)

Date: Thu, 03 Nov 2005 17:01:18 -0600
To: classicrendezvous@bikelist.org
From: "Mark Stonich" <mark@bikesmithdesign.com>
Subject: [CR]Source for 1/2" pitch cogs to fit DA 10 track hubs

James Kenney <JamesKenney@shaw.ca> is set up to make 1/2" pitch cogs that will thread onto DA 10 track hubs.

Mark Stonich;
Minneapolis Minnesota
http://mnhpva.org
http://bikesmithdesign.com