they're not really slots as such. the bushing is crimped there to create a flange to keep it in place, but maybe i can get a very wide screwdriver to grab onto the slots.
i'll try that.
thanks,
-galen pewtherer san francisco, ca
On 1/13/06, Pete Geurds <raleighpro@dejazzd.com> wrote:
> From: "galen pewtherer" <dolface@gmail.com>
> Subject: [CR]help removing mafac canti calipers
>
>
> >> the mounting bolts of the mafac calipers are screwed into what seems
> > to be a bushing or sleeve that's integral to the boss. this bushing
> > turns freely once the mounting bolt is loosened a bit, and i can't
> > figure out how to get a grip on it to stop it from turning. does
> > anyone have any advice about how to do this?
>
> Are those slots along the outer edge?
> It looks like a tool similar to a chainring nut wrench fits on there.
> Plenty of penetrating oil first though.
>
> Pete Geurds
> Douglassville, Pa
>
> _______________________________________________
>
--
-galen