[CR]To complete a Follis Tandem..................

(Example: Framebuilders:Mario Confente)

To: classicrendezvous Rendezvous <classicrendezvous@bikelist.org>
From: "Eugene Powell" <radfin@SpiritOne.com>
Date: Mon, 16 Jan 2006 22:21:03 -0800
Subject: [CR]To complete a Follis Tandem..................

I need the following,

A) Hardware for Mafac cantilever brakes....................... I have the pad holders and the straddle cable bits. I need the mounting bolts, spacer/bushing/washer things, and springs.

2) A 44 tooth TA middle ring.......................... I have a near new 54 outer with 2 sets of holes for the middle ring, I'd really like to find a 44 middle ring with both sets of holes also.

c) Bar end shifters................... Looking for some french ones, I've got campys and suntours.................. but.................. well, I've managed to come up with more or less french bits the rest of the way round................ 'cept for the wheels and the bottom brackets, and the seats.......................... OK the drivetrain is still all french, UH, I think (Sachs Quartz counts doesn't it?)

D) A 8cm stem in 22.2 that will securely clamp a 25.4 bar. The bar is the original Follis engraved unit, unsure who made it...................

I have tons of trading stock, or can pay cash.......................

Thanks,

Gene Powell
Rad Finishes
Portland, OR