[CR]correcting fork alignment/dropouts

(Example: Component Manufacturers:Campagnolo)

To: classicrendezvous@bikelist.org
From: "Bianca Pratorius" <biankita@comcast.net>
Date: Fri, 30 Jun 2006 21:48:21 -0400
Subject: [CR]correcting fork alignment/dropouts

My fork seems to be symetrical, by my measurement, but the center of the tire seems to be a hair off the centerline of the fork crown. One mechanic says to file the dropout on one side to even this out. Does this seem like the best plan?

Garth Libre in Miami Fl.