RE: [CR]Andrew Hague Cycles

(Example: Framebuilders:Tony Beek)

Subject: RE: [CR]Andrew Hague Cycles
Content-class: urn:content-classes:message
Date: Thu, 19 Oct 2006 01:29:20 -0700
In-Reply-To: <001401c6f2f8$46ef31d0$0300a8c0@nicd60e2c6b784>
Thread-Topic: [CR]Andrew Hague Cycles
Thread-Index: Acby+E3yHruDeWK2Tiy8p96DRGkHUwAXntNA
From: "Mark Bulgier" <Mark@bulgier.net>
To: "Nic Henderson" <nic.henderson@ntlworld.com>, <classicrendezvous@bikelist.org>


Nic,

Nice work, thanks for sharing. I used to use A. Hague bits (in the late 70s), and your web page reminded me I have a 2-page black-and-white brochure from that era, describing their custom handlebar stem making system. I scanned it and you are welcome to add it to your website if you see fit.

http://bulgier.net/pics/bike/FrameParts/Andrew_Hague_stem_jig_p1.jpg http://bulgier.net/pics/bike/FrameParts/Andrew_Hague_stem_jig_p2.jpg

Those above are about 600 x 800 pixels and a reasonably small quick download. I also put the full-size (300 dpi) scans up, in case anyone needs it bigger. They're 4 times as tall and wide, about 1 MB each (so, still not too terribly big):

http://bulgier.net/pics/bike/FrameParts/Andrew_Hague_stem_jig_p1_big.jpg http://bulgier.net/pics/bike/FrameParts/Andrew_Hague_stem_jig_p2_big.jpg

He describes the profits to be made with a custom stem business (!?), and describes the building process in some detail.

Mark Bulgier Seattle WA USA

Nic Henderson wrote:
>
> Hello all, I've just done a page on my website about Andrew Hague,
> (who?!) Andrew Hague made and supplied a lot of the frame
> building parts as well as other bike accessories back in the
> late 70's and early 80's. Andrew Hague Cycles supplied
> braze-on bits to the likes of Raleigh and Carlton and also to
> lots of the small builders both in the UK and abroad
> including Mario Confente and Mitch Kneller of Massachusetts, USA.
> Check it out if interested
> http://www.bikebrothers.co.uk/andrewhaguecycles.htm