[CR]Re: Classicrendezvous Digest, Vol 48, Issue 55

(Example: Production Builders:Peugeot:PY-10)

Date: Mon, 11 Dec 2006 19:58:22 -0800 (PST)
From: "Rick G." <reilley_1@sbcglobal.net>
To: classicrendezvous@bikelist.org
In-Reply-To: <MONKEYFOODxZ7xAqaZC00003599@monkeyfood.nt.phred.org>
Subject: [CR]Re: Classicrendezvous Digest, Vol 48, Issue 55

As I posted earlier, I found a set of NOS 10 pitch Dura Ace cranks. I was about to put them on e-bay for lack of chainrings but I found somewhat of a solution. Takagi made a 1/2 alloy conventional pitch sprocket in different sizes (usually black) called the "Takagi MX" The BCD is almost spot on. The chainwheel bolt holes are smaller than usual (it used a nut and bolt originally) but can be reamed or drilled out to accept a conventional chainwheel bolt. The chainrings are not too rare and can still be found.

It might be a cheesy way to get around, but it's better than them sitting in a parts box wasting away

Rick Gaytan

Pitching away in 10mm in

San diego, CA