[CR]Re: Classicrendezvous Digest, Vol 69, Issue 27

(Example: Production Builders:Tonard)

From: "Andrew R Stewart" <onetenth@earthlink.net>
To: <classicrendezvous@bikelist.org>
References: <MONKEYFOOD4QVKQE8zu0000570c@monkeyfood.nt.phred.org>
In-Reply-To:
Date: Tue, 9 Sep 2008 21:10:08 -0400
reply-type=original
Subject: [CR]Re: Classicrendezvous Digest, Vol 69, Issue 27

Jay- While the basic "archutecture" of the bearing elements are probably the same the details would likely be different. So a cone might interchange as far as the balls and axle are concerned but the ball surface treatment, overall length and seals design might all be different. A "type B" fit. Andy Stewart Raleigh, NC
> Date: Tue, 9 Sep 2008 15:39:18 -0500
> From: "Armadillo Farm" <armadillofarm@satx.rr.com>
> To: <classicrendezvous@bikelist.org>
> Subject: [CR]shimano 600
> Message-ID: <9E5FEF762F60422897E647E10A3A7E2E@Cuthbert>
> Content-Type: text/plain;charset="iso-8859-1"
> MIME-Version: 1.0
> Precedence: list
> Message: 2
>
> Does anyone know if there is a change in hub design/parts from the 1980
> 600 to the early 83 600ex hubsets. thanks
>
> jay gruen
> san antonio texas