[CR]Basso Gap, Campy parts F/S

(Example: Framebuilders:Dario Pegoretti)

Date: Sat, 11 Oct 2008 21:58:36 -0600
From: <gear@xmission.com>
To: classicrendezvous@bikelist.org
Subject: [CR]Basso Gap, Campy parts F/S

Hi all,

Before going to ebay, I thought I'd offer up some things I am clearing out to the folks here. First up is an early Basso Gap, Gios Blue with white panels full bike 54c C-C square. Equipped with Super Record, period Mavic clinchers, TTT bar and stem, Campy/Look pedals, later mismatched Campy aero brake levers. This was one of my race bikes and shows some use, but is not bent, rusty or the least bit dead. Has a chrome fork, Concor saddle and worn/dried Vittoria tires. $650 for complete bike as it sits, plus shipping.

Next is a group of Super Record and Nuovo Record bottom bracket items, including English NR cups, Ita NR cups and Ita SR alloy cups, along with an Ita 120+ axle and several bearing sets new and used, all good. One plastic sleeve, a few crank bolts etc. $80 for the whole enchilada plus shipping.

Two sets of Super Record headset bearings in the little round blue and clear holder. One is NOS never opened, one is opened, not sure if it was ever used. $25 for the NOS, $15 for the not sure. Plus shipping.

Chrome Silca frame pump with Campy steel head. uncompressed measures 51cm, compressed measures 47cm. I used it on the seat tube of the 54c Basso above. Works well, not showroom fresh (surface rust showing in bits in spots on the head). But still very good and looks nice. $30 plus shipping.

Photos available upon request, I don't have one of those neat galleries like some of you cats, sorry. Email me at gear@xmission.com.

Thanks!

Greg Overton
back for another load of stuff, near
Salt Lake City, Utah