Re: [CR] Are there any "Box Lining" artists still out there?

(Example: Racing:Wayne Stetina)

From: <"brianbaylis@juno.com">
Date: Wed, 11 Mar 2009 22:11:28 +0000
To: <viciouscycles@excite.com>
Cc: rapidfire10ring@hotmail.com, Classicrendezvous@bikelist.org
Subject: Re: [CR] Are there any "Box Lining" artists still out there?


David,

You are correct. A good genuine pinstriper is the best way if you want i t to look original. Many of the car pinstripers are not used to doing th is sort of work, mainly on account of the small round tubes involved. I find they do charge more to do box lining. Most of them can do regular c ar striping practically blindfolded. But the box lining requires careful lay out using tape as a reference line. Then they freehand about 1/16" from the tape. Takes 2 to 3 hours to do a typical frame. They do cars in no time flat.

Brian Baylis
La Mesa, CA
USA


---------- Original Message ----------
From: david
To: Classicrendezvous@bikelist.org, rapidfire10ring@hotmail.com
Subject: Re: [CR] Are there any "Box Lining" artists still out there?
Date: Wed, 11 Mar 2009 17:13:01 -0400


You should try to find an old school pin striper, one that uses a brush inst ead of tape. A good striper can do the fine lines that make the box stri pe l ook correct. Try a hot rod or show car club to find a good one. Make sure he / she kn ows

how fine the line should be.

David Cowie Oakland , Oregon USA

3rd rock from heat.

-----Original Message----- From: "bruce thomson" [masi3v4me@yahoo.com] Date: 03/11/2009 11:17 AM To: Classicrendezvous@bikelist.org Subject: Re: [CR] Are there any "Box Lining" artists still out there?

Note: Original message sent as attachment

------------------------------------------------------------
Photography School
Learn digital and video photography techniques, lighting and printing. C
lick
now.
http://tagline.excite.com/fc/FgElN1g44JhrJmrB8I7P7foVNFldEthtGYNa3zgWZth
FmjV