Hi Dmitry, all. I thought you were looking for a cable hosing stop for a left side [front] mounted bar-end shifter, kind of an oddity. That's not what it is, I see now that part# 628 mounts on the bottom of the downtube near the bb shell to be used w/ a short stretch of housing to the early Record or GS front der. w/ an integrated housing stop. Presumably this is used w/ the left side shift lever shown in the pic. And presumably used w/ a rod type rear der., e.g. Paris-Roubaix. I apologise for my earlier incomprehension. It's just that you mostly see either double guides/stops or right side only. I don't suppose you'd want to use a generic double guide and grind off the rear cable guide on the right? Billy Ketchum; Chicago, IL; USA,----- Original Message ----- From: "Dmitry Yaitskov" <dima@rogers.com> To: billydavid13@comcast.net Cc: classicrendezvous@bikelist.org Sent: Saturday, September 26, 2009 2:19:14 PM GMT -06:00 US/Canada Central Subject: Re[2]: [CR] WTB: Campagnolo downtube clamp-on front cable stop (part 628)
Hi Billy, all,
Hm. I'm not sure. I looked it up again - here's the page I was referring to:
http://dima.softmaster.co.uk/
Note that it shows a front der, plus - as I understand - 3 different options for controllling it (on my pic, just the first option is shown). The clamp on stop I'm looking for (628) is shown with the front of the (imaginary) bike to the right I think. I.e. the cable stop would be on the left side of the downtube. Also, I'm not sure what would be its purpose for the rear der?
Also, I looked up catalog 16 which I have a scan of in English. On page 31:
http://dima.softmaster.co.uk/
part 628 is also listed, and is called "Front changer clip".
What am I missing?
Anyway... if anybody has one for sale please let me know.
Thanks.
Saturday, September 26, 2009, 1:02:52 PM, billydavid13@comcast.net wrote:
> Hi Dmitry, all. My copy of Campy Catalog #14 [from Chuck Schmidt's
> Velo Retro] is in Italian as yours may be. So I can't be exactly
> sure what they're referring to. But Catalog #15 [also from Chuck] is
> in English and quite clear. Part#629 is the lovely double downntube
> cable stop. Part#628 is a single downtube cable stop. W/ the
> clamping bolt in the normal position under the downtube it's a right
> hand [i.e. rear der.] cable stop. W/ the bolt above the downtube
> [flipped] it'll serve as a left/front der. cable stop. though not so
> pretty. There is no specific left front cable stop. If you look back
> at page 16 in Cat.#14 you'll see 2 pics of #628 in different
> rotations but they're both right hand. You could always do the
> unthinkable and file off the right stop on a #629. Good luck. Billy Ketchum; Chicago, IL; USA.
> ----- Original Message -----
> From: "Dmitry Yaitskov" <dima@rogers.com>
> To: "Classic Rendezvous" <classicrendezvous@bikelist.org>
> Sent: Saturday, September 26, 2009 10:49:13 AM GMT -06:00 US/Canada Central
> Subject: [CR] WTB: Campagnolo downtube clamp-on front cable stop (part 628)
> Hi,
> I'm looking for Campagnolo part# 628 - it's a downtube clamp-on cable
> stop (not guide) for the front cable only (shown on page 16 of Campy
> catalogue 14). Please let me know if you have one for sale, many
> thanks.
--
Cheers,
Dmitry Yaitskov,
Toronto, Canada.