Ron Boi in Kenilworth, Illinois. Ron's a very experienced and diverse builder - RAAM bikes for Lon Haldeman, all the way to fork repairs for PITA high school kids (me!), and very careful frame/fork alignments, and fork re-raking. It's a decent drive, just north of Chicago, but he works based on shipping, too. Contact or Google RRB Cycles, Kenilworth, Illinois. You'd probably have show examples or sketches of critical details, or at least verify that he has the "style" down. Several years ago he was getting painting done by Chris Kvale.
Maybe Franklin Frames near Columbus?
Doug Fattic spoke to me very highly of Rich Gangl in Golden, CO. He's reputed to be hard to contact because he's often out racing. Patrick Brady in Asphalt Magazine did a feature on him several years ago, very positive.
Mike Kone is probably a good source of recommendations, too.
On Tue, Nov 24, 2009 at 10:15 PM, <FujiFish1@aol.com> wrote:
> Dale emailed me off-list (I think), that Cecil has passed away, and I've
> just confirmed it by reading the Bikelist Archives. Oops, big bummer, and
> I
> should have known that ... sorry all. Thanks for setting me straight,
> Dale. Next idea anyone?
>
> Mark Agree
> the REAL final post of the day,
> Southfield MI USA
> ~ ~ ~
>
>
> In a message dated 11/24/2009 9:51:21 P.M. Eastern Standard Time,
> oroboyz@aol.com writes:
>
> (Psst, IIRC, Cecil Behringer passed away a few years ago)
> D
> ------Original Message------
> From: FujiFish1@aol.com
> Sender: classicrendezvous-bounces@bikelist.org
> To: Classic Rendezvous
> Cc: FujiFish1@aol.com
> Subject: [CR] Another Pino Telavio shows up in Detroit - fork is
> neededthough
> Sent: Nov 24, 2009 9:37 PM
>
> Yet another Pino Morroni Telavio road frame has turned up here in the
> Detroit area, and it was purchased by a local guy I know. The problem is
> that
> it is a frame only, in somewhat rough condition, and with no fork.
>
> Crude pics taken at a LBS can be seen here:
> <
> http://www.wooljersey.com/
> >
>
> Barring the nearly impossible chance that someone has a spare Pino fork
> available, does anyone know if Cecil Behringer is still building? Seems
> to
> me he would be the next best person to make one, given the rumors that he
> built some of Pino's bikes anyway. The frame is 58cm c-c, by the way.
> If
> not Cecil, then does anyone have a suggestion for someone else to make
> this,
> or where to acquire a fork that resembles this one on Wayne Bingham's
> Telavio?:
> http://www.wooljersey.com/
>
> Thanks very much...
>
> Ciao,
> Mark Agree
> sending his last CR post of the day, from
> Southfield MI USA
>
>
>
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/
>
>
> Sent from my Verizon Wireless BlackBerry
>
> _______________________________________________
>
--
Ken Freeman
Ann Arbor, MI USA