Alternately, if they used the J.A. Stein CES crank extractor, Stein makes a self-extracting crankbolt assembly to fit the oversized hole - $12.50 from Bike Tools Etc.
http://www.biketoolsetc.com/
>Subject: Re: [CR] WTB non-drive side campy crank arm with Joco side
> note
>Cc: classicrendezvous@bikelist.org
>Message-ID: <4C28D7CA.6030808@m-gineering.nl>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>tod kapke wrote:
> > Greetings,
> >
> > I am looking to buy a left Campy nuovo crank arm. Condition is not an
> > issue. It is going on a daily rider. I recently picked up a good deal on
> > a Mercian for my wife and when i went to rebuild it. I realized somebody
> > had completely trashed the threads on the side for removal. It was
> > tapped by my local LBS but don't want to go there every time i need to
> > get it off.. Thanks !
>
>
>If they used the Cyclus kit, the appropriate sized oversized puller is
>only $10-15 or so
>
>Marten Gerritsen
>Kiel Windeweer
>Netherlands
--
Peter Adler
Macintosh, network consultant
cell: (510) 316-9955
<adlerpe@mac.com>