Re: [CR] Trek 620 with Tange fork

(Example: History:Ted Ernst)

In-Reply-To: <AF1BC1A82C1540DC98D3F338E8EF979E@office1>
References:
Date: Mon, 28 Jun 2010 23:42:14 -0400
From: "Ken Freeman" <kenfreeman096@gmail.com>
To: Leonard Diamond <leonarddiamond@verizon.net>
Cc: classicrendezvous@bikelist.org
Subject: Re: [CR] Trek 620 with Tange fork


Essentially, yes, and its lighter, too. My 1984 Trek 610 came with that HS, too. BTW, I always thought my Trek was on-topic.

If your Tange fork is chrome, it is not likely to be the original fork.

On Mon, Jun 28, 2010 at 10:49 PM, Leonard Diamond < leonarddiamond@verizon.net> wrote:
> Hello All!
>
>
>
> Spent this evening listening to the Mets get routed while taking apart my
> wife's 1984 Trek 620. Even though it misses the cutoff by one year, it is
> a
> steel lugged frame with traditional non indexed components and squeaks in
> as
> KOF.
>
>
>
> The original specs from the vintage Trek website are at:
>
> http://www.vintage-trek.com/TrekBrochure1984Touring.htm#23
>
>
>
> It has a Reynolds sticker on it saying it is made of "butted 531 frame
> tubes". The dropouts are Suntour and the fork is clearly marked on the
> steerer tube "Tange.3.J.R".
>
>
>
> The headset is to me a curious affair. The specs call for a Stronglight
> B10
> Black delrin headset. The threaded race and lower race seem to have metal
> cores embedded in plastic. It uses angular roller bearings in plastic
> races
> and the upper pressed race bearing surface is covered with a loose washer
> to
> provide a flat surface for the bearings. Is this just a cheaper version of
> the A9 headset?
>
>
>
> Len Diamond
>
> Ridgewood, New Jersey USA
>
> _______________________________________________
>

--
Ken Freeman
Ann Arbor, MI USA