Re: [CR] WTB or Trade for a Sugino Mighty Tour 170mm left crank arm

(Example: Production Builders:Cinelli)

References: <mailman.9398.1279754020.76241.classicrendezvous@bikelist.org>
Date: Wed, 21 Jul 2010 18:07:45 -0700 (PDT)
From: "Paul A. Grens" <pgrens@yahoo.com>
To: classicrendezvous@bikelist.org
In-Reply-To:
Subject: Re: [CR] WTB or Trade for a Sugino Mighty Tour 170mm left crank arm


Thanks for the notes, gents.

I just took out my reading glasses and had another look at the crank arm - it is stamped "170 A-5". I have seen 171mm Sugino crank arms over the years, but this one does call for a 170mm companion.

Here's a link to some pics (the Velobase.com entry):

http://www.velobase.com/ViewSingleComponent.aspx?ID=4B38137C-E5FF-4DAC-95E1-14B7F5E8B458&Enum=115&AbsPos=13

And a shorter link:

http://tinyurl.com/24eryv3

I think anything from the Mighty family would match it well enough.

Cheers,

Paul Grens Chicago, Illinois, U.S.A.

Message: 11 Date: Wed, 21 Jul 2010 23:11:49 +0000 From: joeb-z@comcast.net Subject: Re: [CR] WTB or Trade for a Sugino Mighty Tour 170mm left crank arm To: "Paul A. Grens" <pgrens@yahoo.com>, classicrendezvous-bounces@bikelist.org, classicrendezvous@bikelist.org Message-ID:

<378898689-1279754017-cardhu_decombobulator_blackberry.rim.net-47292718-@bda427.bisx.prod.on.blackberry>

Content-Type: text/plain

A Sugino Mighty would really look ok also. Also I suspect you need a 171 mm. Sugino has a lot of subtle variations in these crank arms.

Joe Bender-Zanoni Whitneyville CT Sent via BlackBerry by AT&T

-----Original Message----- From: "Paul A. Grens" <pgrens@yahoo.com> Sender: classicrendezvous-bounces@bikelist.org Date: Tue, 20 Jul 2010 20:44:02 To: <classicrendezvous@bikelist.org> Subject: [CR] WTB or Trade for a Sugino Mighty Tour 170mm left crank arm

Howdy,

I'm working on a build for a friend who is an avid rider but has never had a really nice frame. The basis for this build is a cosmetically challenged, but structurally sound, Viner Professional, roughly 1981. I'm building it on a budget, so it's going to look like something out of a Mad Max film set when it's

finished, and as it is coming together, I realized that I have a nice drive side

Sugino Mighty Tour arm w/rings on hand in good shape, but the left, well, I never had one.

Thread and taper condition are much more important here than cosmetics - does anyone have an orphaned left arm in 170mm that they'd care to part with? Something similar looking from the same family would be fine, too. I have some items to trade and can also buy it outright.

Thanks in advance!

Paul Grens Chicago, Illinois, U.S.A.

_______________________________________________

------------------------------

_______________________________________________

End of Classicrendezvous Digest, Vol 91, Issue 59 *************************************************