jim abt wrote: I am extremely desperate and have been searching the world wide for months!! Ihave a need for a freewheel extractor tool that fits the shimano 3.3.3. Freewheel.
Most freewheels can easily be taken apart and with a bit more patience put back together again.
remove the smaller cogs with two chainwhips until you can access the bearing ring.
unscrew the bearing ring with a hammer and punch , lefthand thread
lift off the freewheel, cathing all the tiny bearings, the two springs and freewheel pawls if you want to reassemble
Put the remainder in a stout vise and unscrew
assembly is a reversal of the procedure ;)
-- mvg
Marten Gerritsen
Kiel Windeweer
Netherlands