Re: [CR]Dating a Falcon Pro....

(Example: Framebuilders:Bernard Carré)

Date: Mon, 01 Jan 2001 12:40:39 -0500
From: Jerry & Liz Moos <moos@penn.com>
To: "D. Kennard" <d.kennard@home.com>
CC: classicrendezvous@bikelist.org
Subject: Re: [CR]Dating a Falcon Pro....
References: <B674E9C6.1F3C%d.kennard@home.com>


Duane. I have a frame I got from Dave Martinez that is nearly identical, same graphics except no "Professional", same fork crown, same 120 spacing, same brazeons or lack thereof. Dave and I figured late 70's or early 80's. The recessed brakes, the top tube brazeon cable guides, and the graphics seem to indicate 80's, while the 120 spacing and lack of shifter bosses seem to indicate 70's.

Regards,

Jerry Moos

D. Kennard wrote:
> Hi gang, I just picked up this Falcon Pro. frameset,
>
> http://www.duane.kennard.com/falpro/falpro3.jpg
> http://www.duane.kennard.com/falpro/falpro1.jpg
> http://www.duane.kennard.com/falpro/falpro2.jpg
> http://www.duane.kennard.com/falpro/falpro4.jpg
> http://www.duane.kennard.com/falpro/falpro5.jpg
>
> and am hoping some other Falcon owners can help me
> determine the date of manufacture, and suggest proper(period)
> components for it. This frame uses recessed type brake
> mounts, clamp-on shifters and front deraileur, 120mm(5spd)
> rear spacing, under BB cable guides, and the short Camp.
> rear dropouts. Reynolds label says "531 fork blades & stays &
> butted frame tubes". Anyone know when these were made??
> I'm guessing around '80, but who knows? Thanks for any help
> here, and HAPPY NEW YEAR!
>
> Duane Kennard <d.kennard@home.com>