Re: [CR]RE: Frame size/saddle-height/handlebar height

(Example: Component Manufacturers:Avocet)

Date: Thu, 08 Feb 2001 13:52:52 -0500
From: Jerry Moos <moos@penn.com>
To: Tom Dalton <tom_s_dalton@yahoo.com>
CC: Diane Feldman <feldmanbike@home.com>, classicrendezvous@bikelist.org
Subject: Re: [CR]RE: Frame size/saddle-height/handlebar height
References: <20010208163438.12379.qmail@web903.mail.yahoo.com>


You have some valid points, but I don't agree about new equipment being more practical and economical to maintain. While it may be expensive to maintain something one actually rides in completely original condition, as some CRers do, it is infinitely easier to maintain classic equpiment in functional condition than with new equipment. This is the whole philosophy behind Rivendell and the iBOB list and is shared by many on the CR list. Tried to buy an 8-speed cassette in the combo you want lately? Campy 9 speeds will probably soon become a problem. When one replaces Ergo/STI components one has to be sure the new chain is compatible with the cassette, is compatible with the dreailleur, is compatible with the shifters, not to mention chain with cassette with chainrings. Don't mix 10 speed with 9 speed with 8 speed. Don't mix Campy with Shimano, and if someone else makes it, figure which it is campatible with and if they make both, don't mix the Shimano type ones with the Campy type ones from the same manufacturer. This is cheap? This is easy? Sometimes it is easier to just chuck the whole gruppo and buy the latest coolest one, which of course the Shimano marketerers want you to. And while you're at it maybe you should just buy a new bike as last year's Ti model didn't have adequate Al/V numbers, whatever that meant. A disposable bike - the marketer's dream. That classic 7 speed FW on the other hand can be replaced with 7 or 6 or 5 speed FW, Regina or SunTour or Atom or Shimano with a Regina or Sedis or HHK or Shimano chain with Campy or Simplex or Suntour or Shimano or Huret derailleurs, the same front and back or not, with matching shift levers or not, with a dozen brands of pedals from 1920 to 1990 that could all use the same cleats or no cleats at all. Have to watch a bit for French and Swiss thread, but the vast majority of bikes made from the mid 70s to 1990 have the compatible threads except only for BB. Replace almost any classic component with almost any other classic component you have handy or can buy cheap or just happen to fancy. Isn't that easier?

Regards,

Jerry Moos

Tom Dalton wrote:
> David,
> To characterize consumers as "suckers" simply because
> they buy what is made available to them might be bit
> unfair. Perhaps you are simply suggesting that the
> bike industry (and the publications that are supported
> by it) is not putting customers' needs first these
> days. I would have to agree with that. But, I bet
> it's a lot easier to point to Lance Armstrong's Trek,
> say "it weighs 18 pounds and has 18 gears and he won
> the Tour de France," than to say "you're old, over
> weight, and you're no Lance Armstrong. Your
> requirements are nothing like his. To obtain a
> posture that your tired body is capable of
> maintaining, you need a bigger frame. Given that you
> don't have a personal mechanic or an unlimited supply
> of chains and freewheels, and considering that you
> don't know how to properly select your gears anyway,
> you don't need 9-speed STI... "
>
> To be sure, significant forces in the bike industry
> are selling customers gear that will ultimately hinder
> their progress as riders and drive them away from the
> sport. These are the companies that sold everyone
> MTB's (yuk) and then fully-suspended MTB's
> (double-uck) and now nobody is buying much of
> anything. They didn't enjoy cycling, even after they
> bought in to the $2000 Y-bike. They've moved on. Go
> figure. The bike industry certainly shoots itself in
> the foot now and again.
>
> Getting back to the poor consumer, how can we blame
> him or her? Without significant experience, or honest
> advice from someone with significant experience, he or
> she is left to use what's most readily available.
> This leads me to a certain gripe I have about
> attitudes voiced by some CRer's and other Retro types:
> Is it reasonable to expect that people will go out of
> their way to track down out-of-production equipment to
> "enhance" their riding experiece, when what most
> people care about is the ride and not the asthetics,
> history, nostalgia, etc. that drives us to our strange
> pursuit? Really, if I'm going for any half-serious
> ride I ain't packing friction shifting, toeclips, or
> tubulars, be sure of that. The new stuff is simply
> better. If I ever get back to the point where I'm
> riding more than twice a week, I'll be 9-speed STI'ing
> as soon as I can afford it. Aside from that fact that
> such systems provide performance advantages over my
> current 7-speed downtube system, I just don't want to
> have to hunt down old style Campy axles and NOS
> 7-speed freewheels when I inevitably need them. I
> don't have the time or the money to use and maintain
> collectable equipment. I'll save it for the ocasional
> nostalgia ride.
>
> BTW- It was Rodale Press. Now it's Rodale Inc. Since
> they fired everyone who actually rode a bike, Bicyling
> has become a bigger rag than ever. I can't tell ad
> from editorial anymore. But are they really a
> significant influence on consumers? I think shop
> employees and fellow riders have a lot more influence
> here. Most people are smart enough to see Bicycling
> for what it is.
>
> Tom Dalton
>
> --- Diane Feldman <feldmanbike@home.com> wrote:
> > And it's why most recreational riders are suckers if
> > they let themselves get
> > scammed into buying the newest types of road bikes
> > by bike companies or
> > Rodale Publishing!
> > David Feldman
> > ----- Original Message -----
> > From: "Andrew & Merilee Gillis"
> > <apgmaa@earthlink.net>
> > To: <classicrendezvous@bikelist.org>
> > Sent: Friday, February 02, 2001 10:01 PM
> > Subject: [CR]RE: Frame size/saddle-height/handlebar
> > height
> >
> >
> > > To all CR's:
> > >
> > > I want to thank Tom Dalton for his thorough and
> > well reasoned coverage of
> > > the issue of modern vs retro saddle height (and
> > handlebar height). I only
> > > want to add a few items to his list (IMHO):
> > >
> > > 1. My copy of Bernard Hinault's (& Claude
> > Genzling's) book "Road Racing
> > > Technique and Training" comments on pg 101
> > (Climbing, seated back) :
> > >
> > > "The position for flat riding that we described
> > earlier is also good for
> > > climbing, especially because the saddle is high.
> > If road riders used to
> > > feel they had to raise their saddles for mountain
> > passes, it was because
> > > they were often too low by ergonomic standards."
> > >
> > > 2. Besides all of the modern road and technology
> > improvements which have
> > > increased bicycle speed and necessitated a
> > powerful and aerodynamic
> > > position, I think that the increase in high
> > dollar/high stakes racing
> > > sponsorship promotes a trend towards "perfect"
> > body types. Those whose
> > > physiologies aren't skeletally perfect just don't
> > cut it.
> > >
> > > 3. Modern arched cycling shoes allow for a higher
> > seat position due to the
> > > alignment of the foot. Old style flat-soled shoes
> > (I'm virtually certain)
> > > promoted a flatter angle of the foot and
> > consequently a lower seat height.
> > >
> > > 4. A too-low handlebar position is verifiably hard
> > on the body. I have
> > some
> > > mild bone spurs in the back of my neck due to 20
> > years of straining to
> > > raise my head up. I've solved this problem by
> > using an extended steering
> > > tube (added a 13mm headset washer) and a higher
> > stem.
> > >
> > > The Nitto "Pearl 12" stem is the same horizontal
> > size as a 13 cm Cinelli,
> > > but is vertically 4mm higher than a Cinelli 1A,
> > and 6mm higher than a
> > > Cinelli XA, relative to their maximum heights
> > >
> > > I'm also glad to have the option of installing a
> > 3T "Morphe" handlebar if
> > I
> > > ever need to go higher (about 13mm higher than
> > 1997 Cinelli Eubios).
> > >
> > > 5. I was indirectly reminded of the
> > non-correlation of my bicycle design
> > > and posture to modern "professional" machines thru
> > an article in European
> > > Car magazine: A comparison between the VW 1.8
> > turbo engine and a Formula 1
> > > engine showed that the two designs are so
> > task-specific that there is
> > > virtually no similarity!
> > >
> > > regards,
> > >
> > > Andrew Gillis (warming up in Long Beach, CA)
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Classicrendezvous mailing list
> > > Classicrendezvous@bikelist.org
> > >
> >
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
> >
> >
> > _______________________________________________
> > Classicrendezvous mailing list
> > Classicrendezvous@bikelist.org
> >
> http://www.bikelist.org/mailman/listinfo/classicrendezvous
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
>
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous