Re: [CR]Milling Steerer Tube on Masi?

(Example: Production Builders:Pogliaghi)

From: <RALEIGH531@aol.com>
Date: Tue, 5 Jun 2001 12:02:49 EDT
Subject: Re: [CR]Milling Steerer Tube on Masi?
To: classicrendezvous@bikelist.org


Perhaps just something as simple as a burr left from cutting the steerer to length? Could be the steerer is proper diameter and just the the entry is too small, preventing insertion of stem. Should be detectable with finger nail. A deburring tool, or lacking that, a round file and emery cloth should work.

Pete Geurds
Douglassville, PA