Re: [CR]3.5 mm hex wrench

(Example: Framebuilders:Alex Singer)

From: <>
Date: Sat, 11 Aug 2001 15:50:42 EDT
Subject: Re: [CR]3.5 mm hex wrench

In a message dated 8/11/2001 1:42:45 PM Eastern Daylight Time, writes:

> James Lee)
> Sender:
> To:
> Where can I get an elusive Campy 3.5 mm hex wrench (delta brake cable
> wrench)? Thanks, Jay Lee
> Sopme one came in with Deltabrakes last week and while i know i had many of
> those 3.5's and still do, I couldn't find them

They are available through Campy USA's distribution network or Snap-On. If you have a crisp 3, and it's not through-hardened, strike it squarely on a flat while supporting ythre opposite flat on an anvil or vise. This will squeeze two edges apart and make threm near what you need.

there's a darn close Fractional Size - It's what i used last week on the Del;tas

Do the math and find out

Larry Black