Re: [CR]Teledyne Titan replacement fork


Example: Framebuilders:Tony Beek
From: <OROBOYZ@aol.com>
Date: Wed, 22 Aug 2001 09:24:31 EDT
Subject: Re: [CR]Teledyne Titan replacement fork
To: SM2501@aol.com, classicrendezvous@bikelist.org


In a message dated 8/22/01 8:33:17 AM Eastern Daylight Time, SM2501@aol.com writes:

<< From center of the brake hole to the center of the dropout, the measurement is 365mm. to the top of the dropout, the measurement is 361mm. I dry fitted a 700c fork in the frame, and it dropped the front end 1/2". >>

Wow, that IS longer, you are right! Unfortunately the off the rack forks you might find will be dorky I think. I can supply a reasonably affordable ($125-150.) custom built fork with full sloping crown and correctly mimicked geometry.

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina USA 27408 336-274-5959 Fax 336-274-6360 <A HREF="http://www.cyclesdeoro.com">cyclesdeORO.com</A> <A HREF="http://www.classicrendezvous.com/main.htm">Classic Rendezvous</A>