Re: Fw: [CR]Help on cutting a steerer tube..OOPS!


Example: Framebuilders:Dario Pegoretti
From: <RALEIGH531@aol.com>
Date: Sat, 22 Sep 2001 13:13:01 EDT
Subject: Re: Fw: [CR]Help on cutting a steerer tube..OOPS!
To: classicrendezvous@bikelist.org


In a message dated 9/22/01 12:06:22 PM Eastern Daylight Time, Philcycles@aol.com writes:


> A screwed race is much better. Guides the blade and chases the thread.
> Not to beat a dead horse but I find that two upper races (in steel) do a nicer job of guiding the saw blade, with the lower one doing the thread chasing duty. Followed by the de-burring as described in previous posts.

Pete Geurds
Douglassville, PA