[CR]FS: Never ridden Bob Jackson frame and fork

(Example: Framebuilding:Technology)

From: "Frank" <frank121@icok.net>
To: <classicrendezvous@bikelist.org>
References: <CATFOODwViaaskjeo4l00000637@catfood.nt.phred.org>
Date: Thu, 25 Oct 2001 22:27:09 -0500
Subject: [CR]FS: Never ridden Bob Jackson frame and fork

Bob Jackson Reynolds 531C This is an incredibly beautiful custom-built road bike frame and fork. I think the lug work, paint, and attention to detail are wonderful. This bike has been built up but never ridden. It has the following features:

-The model is a Bob Jackson Messina 531C -Tubing is Reynolds 531C -Lugs are Bocama 3 window long point. -Seat tube length is 54cm c-c -Top tube length is 55cm -Straight bladed forks with 45mm offset -Seat tube angle 73.5 degrees. -Head tube angle 73 degrees -The chain stays were requested 1cm longer than normal so were made 41.5cm -130mm rear end spacing -700c wheels. -Internal top tube rear brake cable routing -Braze-on's include down tube shift lever bosses, two sets of water bottle bosses, pump peg, and head tube shifter cable guides -Chrome front dropouts, rear dropouts, and right hand rear chainstay -Deep red metallic top tube, down tube, and stays -Champagne metallic head tube, fork blades and seat tube -White pinstriping where two colors meet -White Bob Jackson decals on the down tube only -Bob Jackson head crest on the head tube -Includes unused Shimano 105 headset -Only mark I have found on the bike is a light bike shop scratch on the left side of the seat tube...barely noticeable. -$725 plus shipping and insurance. Picture available upon request.

Thanks,

Frank Phillips