Re: [CR]3 arm style crank question

(Example: Component Manufacturers:Cinelli)

From: "thestows" <thestows@mediaone.net>
To: "nath" <ferness261@voyager.net>, <classicrendezvous@bikelist.org>
References: <22.1f13fa98.292aecae@aol.com> <003201c17156$97d96ee0$6c27cfa9@islandia>
Subject: Re: [CR]3 arm style crank question
Date: Mon, 19 Nov 2001 21:05:04 -0500


I got mine from a friend, off his Fuji, don't remember the model. dates to 1973 or 1974.

David Stow
Jacksonville Fl


----- Original Message -----
From: nath
To: classicrendezvous@bikelist.org
Sent: Monday, November 19, 2001 7:02 PM
Subject: [CR]3 arm style crank question



> Speaking of 3-arm cranks . . . does anyone know what kind of frames the
> Sugino Maxy was used on? The BCD was 106mm, and the c-c measurement of the
> holes was 92mm. I haven't been able to find much about these cranks and
> their applications, and what I do know came from the LBS's Sutherlands.
>
> Any help would be appreciated. (And if this turns out to be non-classic
> content, my apologies in advance. . . .)
>
> nath dresser
> spring green, wi (where autumn's arrived again)