I vaguely remember from high school a fellow with a Bob Jackson with
Campagnolo dropouts who had a 30 tooth cog on a regular nouvo record rear
derailleur with Sugino Mighty cranks. I do not remember the chain wheel
combination. Chain stay length was recreational.
Also, the dropout type might matter. Again, a vague recollection, but the
dropout type might also affect the derailleur capacity. I believe that a
SunTour VGT Luxe (which I believe could handle less teeth than a SunTour
VGT) could take a 34 tooth cog with a SunTour dropout but only a 32 tooth
cog on different to dropouts.
Tom ( more vague memories than ever with three kids) Witkop
Rockville, Md.
On Thu, 29 Mar 2001 08:24:15 -0500 "Moos, Jerry" <jmoos@urc.com> writes:
> This comes up relatively frequently. Nominally NR was limited to 26T,
> but by
> carefully adjusting chain length, most people find it works find for
> 28T, at
> least when using a typical 52/42 chainring combo on an NR crank.
>
> Regards,
>
> Jerry Moos
>
> -----Original Message-----
> From: Bikerdaver@aol.com [mailto:Bikerdaver@aol.com]
> Sent: Thursday, March 29, 2001 2:01 AM
> To: classicrendezvous@bikelist.org
> Subject: [CR]Campy NR Rear Cog Capacity Query.
>
>
> Hello All-
> I am pretty sure this topic was once discussed, but I can't remember
> what
> the
> consensus was regarding NR reae derailluer Capacity. Can some one
> update me?
>
> Thank you in advance--
> Dave "looking at a 28t cog" Anderson
>
> _______________________________________________
>
> _______________________________________________
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/