At 09:30 PM 8/6/2001 -0400, Philcycles@aol.com wrote:
>In a message dated 8/6/01 5:15:50 PM, jeffslotkin@home.com writes:
>
><< I can tell you that a Shimano cartridge is a different taper angle. This I
>checked, and while I know some people torque 'em on there and ride anyway,
>it seems like an especially bad idea to me.
>
> >>
>
>The taper angle is 2 degrees on Stronglight and TA and Shimano and everything
>but Superbe Pro. It's the width of the taper that's different.
>Phil Brown
Hmmm. I pressed my T/A's onto a Shimno UN72 by hand, and observed a substantial gap on all four sides of the spindle where it faced me. It was obviously touching on the inside, no? There was no gap on the T/A spindle. In my case, the taper is different.
I would have preferred to use the UN72 on this bike, because it gets used in slush and the T/A isn't sealed. I'll be in there twice a year, I suppose.