[CR]WTT: Paletti panto'd chainring for similar Colnago ring

(Example: Framebuilders:Richard Moon)

From: "C. Andrews" <chasds@mindspring.com>
To: <classicrendezvous@bikelist.org>
Date: Fri, 7 Sep 2001 12:54:02 -0700
Subject: [CR]WTT: Paletti panto'd chainring for similar Colnago ring

I have a 52-tooth Campagnolo NR chainring with crank-pin installed (the little gizmo that keeps the crank from flexing...what are those called, anyway?); inner webbing cut away, nice clean grooves milled in the outer web, below the teeth, a double-groove actually, with the stylized letters *LP* milled above each crank-bolt hole. It's the Paletti logo, something I discovered only recently thanks to Joe Bell and his decal collection (thanks Joe!)...

The teeth are mildly worn, but still have plenty of miles on them. I have no use for it whatever. I'd like to trade it for a Colnago-milled outer chainring with the Colnago flower pantographed thereon, above the crank-bolt-holes, with the oval millings in the inner webbing. Often seen on Colnago Supers in the early 70s.

If you're interested, e-mail me privately. If you have a 70s Paletti, you need this chainring..<g> or if you just collect early pantographed stuff and you'd like to add a rarity to your collection...and you can part with one of your Colnago rings...give me a holler!

Thanks.

Charles