Re: [CR]Removing FW From Bare Hub


Example: Component Manufacturers:Campagnolo
From: <GandJFahey@aol.com>
Date: Fri, 22 Feb 2002 02:34:13 EST
Subject: Re: [CR]Removing FW From Bare Hub
To: velostuf@qwest.net
Cc: classicrendezvous@bikelist.org


Another way to remove the freewheel form a bare hub is to build up a wheel. First, use a pair of chain whips to remove the cogs off the body of the freewheel. This will give you room on the drive side for the build. After it is built, remove the freewheel in the normal way.

Glenn Fahey
Herndon, VA