At the bike shop I worked at years ago, we used thin plastic shims to protect the frames when adding etro parts. However, most high-end components are milled with close tolerances so that the use of shims are not possible other than some seatposts or DT shifters and BB clips. Unfortunately you may forced to "grin and clamp it" without the use of shims.
Regards, Steve Neago
Cincinnati, OH
> I'm in the process of assembling the components to build up a Masi frame.
I
> was wondering if there is any special tips some of you may have to protect
> the paint from the metal clamps of the shifters, front derailleur and
other
> clamped on components, or do you just bite the bullet and clamp down on
the
> part.
>
> David Goerndt
> Orlando, FL