Re: [CR]Reynolds Tubing Question

(Example: Component Manufacturers:Cinelli)

From: "Rick Chasteen" <rchasteen@kc.rr.com>
To: <LouDeeter@aol.com>, <classicrendezvous@bikelist.org>
References: <090875F5.03AE3472.0269AA25@aol.com>
Subject: Re: [CR]Reynolds Tubing Question
Date: Wed, 1 May 2002 13:20:23 -0500


Lou:

It's my understanding that the higher temperatures heat treats the tube and allows it to reach its design strength.

Rick Chasteen, Kansas City


----- Original Message -----
From: LouDeeter@aol.com
To: classicrendezvous@bikelist.org
Sent: Wednesday, May 01, 2002 1:11 PM
Subject: Re: [CR]Reynolds Tubing Question



> I've been following all of this and based on this website (below) for Reynolds tubing, something seems amiss. The site says to braze at high temp and not use silver solder. Conventional wisdom would seem to be the opposite. Anybody really know anything about this? Lou Deeter, Orlando FL