Re: [CR]was: twisted/now:Tie and solder

(Example: Humor)

From: <NortonMarg@aol.com>
Date: Thu, 18 Jul 2002 00:33:55 EDT
Subject: Re: [CR]was: twisted/now:Tie and solder
To: Steve@sburl.com, classicrendezvous@bikelist.org


In a message dated 7/17/02 7:55:22 PM Pacific Daylight Time, Steve@sburl.com writes:

<< The
   loose spokes would rub against each other, causing noise and wear. >> On any moderately tight lacing job (with older rims that won't take a lot of tension), there can be enough movement of the spokes that they wear a groove where they cross, then they "click" when climbing. That's the perfect time to apply the tie and solder technique. Stevan Thomas Alameda, CA