Re: [CR]Hub Oil

(Example: Framebuilders:Norman Taylor)

Date: Wed, 26 Jun 2002 06:20:21 -0700 (PDT)
From: "Tom Dalton" <tom_s_dalton@yahoo.com>
Subject: Re: [CR]Hub Oil
To: classicrendezvous@bikelist.org
In-Reply-To: <1a8.42ef0bc.2a4a3bd3@aol.com>


There was a CR thread on this very subject several weeks ago. Some said that the holes are for grease injection. I said that grease guns were not common in the bike world before MTB-things like Grease Guard, though several people corected me. Okay, so they had grease guns in their toolboxes before everyone else. I still say that Campy put the holes in the caps and shell so that oil could be dripped in to loosen up old grease. That's what I was told by a couple of reliable sources "back in the day." Of course, the holes can also be used for oil-only lube purposes. This was once more common than today, especially on the track. I've heard the truly hard-core would also remove one ball bearing, in some sort of (misguided?) attempt to further reduce friction. Tom Dalton Bethlehem, PA CMontgo945@aol.com wrote: In a message dated 6/25/2002 2:04:40 PM US Mountain Standard Time, monkeylad@mac.com writes:


> On Tuesday, 25, 2002, at 12:10AM, wrote:
>
> >Anybody oil your hubs instead of grease? What kind and how often do you use
> >it?
>
> I did for a very short time on the track, taking the tip from Eddy. I used
> Phil and no dustcaps, when the wheels started to roll I had oil all over my
> spokes. It wasn't quite as bad as Chuck described, but not a whole lot
> better either. I know a couple of folks that have done it on the road for
> time trials and I't doesn't seem to help a whole lot.
> enjoy,
> Brandon"monkeyman"Ives
>

OK, ya'll convinced me. I'll grease the damn things. BUT, why then do so many vintage hubsets have oil holes?

Run with it, Craig in Tucson

_______________________________________________

---------------------------------
Do You Yahoo!?
Sign-up for Video Highlights of 2002 FIFA World Cup